Università degli Studi Guglielmo Marconi

Dipartimento di Scienze Ingegneristiche

Pubblicazioni

Pubblicazioni Afferenti al Dipartimento di Scienze Ingegneristiche

Energia e Mobilità

2021

  • A Colantoni, M Villarini, D Monarca, M Carlini, EM Mosconi, E Bocci "Economic analysis and risk assessment of biomass gasification CHP systems of different sizes through Monte Carlo simulation", Energy Reports 2021, 7, 1954-1961
  • R Moradi, M Villarini, E Habib, E Bocci, A Colantoni, L Cioccolanti, "Impact of the expander lubricant oil on the performance of the plate heat exchangers and the scroll expander in a micro-scale organic Rankine cycle system", Applied Thermal Engineering 2021, Vol. 189, 116714
  • FI Gallardo, AM Ferrario, M Lamagna, E Bocci, DA Garcia, TE Baeza-Jeria, "A Techno-Economic Analysis of solar hydrogen production by electrolysis in the north of Chile and the case of exportation from Atacama Desert to Japan", Int. Journal of Hydrogen Energy 2012, Vol. 46 (26), 13709-13728
  • R Caponi, AM Ferrario, E Bocci, G Valenti, M Della Pietra, "Thermodynamic modeling of hydrogen refueling for heavy-duty fuel cell buses and comparison with aggregated real data", Int. Journal of Hydrogen Energy 2021
  • Del Zotto, A Monforti Ferrario, A Hatunoglu, A Dell'Era, S McPhail, E. Bocci, "Experimental Procedures & First Results of an Innovative Solid Oxide Fuel Cell Test Rig: Parametric Analysis and Stability Test", Energies 2021, Vol. 14 (8), 2038
  • R Moradi, E Habib, E Bocci, L Cioccolanti, "Component-Oriented Modeling of a Micro-Scale Organic Rankine Cycle System for Waste Heat Recovery Applications", Applied Sciences 2021, Vol. 11 (5), 1984

2020

  • Orecchini, F.; Santiangeli, A.; Zuccari, F. "Real Drive Well-to-Wheel Energy Analysis of Conventional and Electrified Car Powertrains". Energies 2020, 13(18), 4788; ISSN 1996-1073; https://doi.org/10.3390/en13184788 - 14 Sep 2020 - MDPI
  • F. Orecchini, A. Santiangeli, F. Zuccari: "Hybrid-electric system truth test: Energy analysis of Toyota Prius IV in real urban drive conditions". Sustainable Energy Technologies and Assessments, Volume 37, February 2020, 100573, ISSN 2213-1388, https://doi.org/10.1016/j.seta.2019.100573. Publisher: Elsevier Ltd.
  • V Marcantonio, A Monforti Ferrario, A Di Carlo, L Del Zotto, D Monarca, E Bocci, "Biomass Steam Gasification: A Comparison of Syngas Composition between a 1-D MATLAB Kinetic Model and a 0-D Aspen Plus Quasi-Equilibrium Model", Computation 2020, Vol. 8 (4), 86
  • R Moradi, E Habib, E Bocci, L Cioccolanti, "Investigation on the use of a novel regenerative flow turbine in a micro-scale Organic Rankine Cycle unit", Energy 2020, Vol. 210, 118519
  • FI Gallardo, AM Ferrario, M Lamagna, E Bocci, DA Garcia, TE Baeza-Jeria, "A Techno-Economic Analysis of solar hydrogen production by electrolysis in the north of Chile and the case of exportation from Atacama Desert to Japan", Int. Journal of Hydrogen Energy 2020
  • AM Ferrario, C Amoruso, RV Robles, L Del Zotto, E Bocci, G Comodi, "Power-to-Gas from curtailed RES electricity in Spain: potential and applications", 2020 IEEE Int. Conf. Environment and Electrical Engineering
  • A Monforti Ferrario, FJ Vivas, F Segura Manzano, JM Andújar, E Bocci, "Hydrogen vs. Battery in the Long-term Operation. A Comparative Between Energy Management Strategies for Hybrid Renewable Microgrids", Electronics 2020, Vol. 9 (4), 698
  • V Marcantonio, E Bocci, JP Ouweltjes, L Del Zotto, D Monarca, "Evaluation of sorbents for high temperature removal of tars, hydrogen sulphide, hydrogen chloride and ammonia from biomass-derived syngas by using Aspen Plus", Int. Journal of Hydrogen Energy 2020, Vol. 45 (11), 6651-6662
  • R Moradi, V Marcantonio, L Cioccolanti, E Bocci, "Integrating biomass gasification with a steam-injected micro gas turbine and an Organic Rankine Cycle unit for combined heat and power production", Energy Conversion and Management 2020, Vol. 205, 112464
  • V Marcantonio, E Bocci, D Monarca, "Development of a chemical quasi-equilibrium model of biomass waste gasification in a fluidized-bed reactor by using Aspen Plus", Energies 2020, Vol. 13 (1), 53

2019

  • F. Zuccari, F. Orecchini, A. Santiangeli, T. Suppa, F. Ortenzi, A. Genovese, G. Pede: "Well to wheel analysis and comparison between conventional, hybrid and electric powertrain in real conditions of use". AIP Conference Proceedings 2191, 020158 (2019); ISBN: 978-0-7354-1938-4; https://doi.org/10.1063/1.5138891.
  • Orecchini F., Santiangeli A., Zuccari F., Pieroni A., Suppa T. (2019) "Blockchain Technology in Smart City: A New Opportunity for Smart Environment and Smart Mobility". In: Vasant P., Zelinka I., Weber GW. (eds) Intelligent Computing & Optimization. ICO 2018 - Pattaya, Thailand, October 4-5, 2018. Advances in Intelligent Systems and Computing, vol 866, pp. 346-354. Springer, Cham. Doi: https://doi.org/10.1007/978-3-030-00979-3_36
  • A Di Carlo, M Moroni, E Savuto, V Pallozzi, E Bocci, P Di Lillo, "Cold model testing of an innovative dual bubbling fluidized bed steam gasifier", Chemical Engineering Journal 2019, Vol. 377, 119689
  • D Bricca, E Bocci, E Santini, "Technical and economic analysis of solar pumping irrigation system for rural areas in Ethiopia", 2019 IEEE Int. Conf. Environment and Electrical Engineering
  • V Marcantonio, M De Falco, M Capocelli, E Bocci, A Colantoni, M Villarini, "Process analysis of hydrogen production from biomass gasification in fluidized bed reactor with different separation systems", Int. Journal of Hydrogen Energy 2019, Vol. 44 (21), 10350-1036
  • V Marcantonio, E Bocci, D Monarca, "Development of a Chemical Quasi-Equilibrium Model of Biomass Waste Gasification in a Fluidized-Bed Reactor by Using Aspen Plus", Energies 2019, Vol. 13 (1), 1-15
  • M Villarini, V Marcantonio, A Colantoni, E Bocci "Sensitivity analysis of different parameters on the performance of a CHP internal combustion engine system fed by a biomass waste gasifier", Energies 2019, Vol. 12 (4), 688
  • Moradi, R.; Cioccolanti, L.; Bocci, E.; Villarini, M.; Renzi, M. "Numerical investigation on the performance of a regenerative flow turbine for small-scale Organic Rankine Cycle systems", Journal of Engineering for Gas Turbines and Power, 2019, Vol. 141, 9
  • Hamedani, S. R.; Del Zotto, L.; Bocci, E.; Colantoni, A.; Villarini, M., "Eco-efficiency assessment of bioelectricity production from Iranian vineyard biomass gasification", Biomass and Bioenergy, 2019, Vol. 127, 105271
  • Rajabi Hamedani, S.; Kuppens, T.; Malina, R.; Bocci, E.; Colantoni, A.; Villarini, M., "Life Cycle Assessment and Environmental Valuation of Biochar Production: Two Case Studies in Belgium", Energies 2019 Vol. 12, 11, 2166
  • Marcantonio, V.; De Falco, M.; Capocelli, M.; Bocci, E.; Colantoni, A.; Villarini, M., "Process analysis of hydrogen production from biomass gasification in fluidized bed reactor with different separation systems", International Journal of Hydrogen Energy,2019, Vol. 44,21, p. 10350-10360
  • Villarini, M.; Marcantonio, V.; Colantoni, A.; Bocci, E., "Sensitivity Analysis of Different Parameters on the Performance of a CHP Internal Combustion Engine System Fed by a Biomass Waste Gasifier", Energies 2019, Vol. 12, 4, 688.

2018

  • Barbanera M., Cotana F., Di Matteo U. (2018). "Co-combustion performance and kinetic study of solid digestate with gasification biochar", RENEWABLE ENERGY, vol. 121, p. 597-605, ISSN: 0960-1481
  • F. Orecchini, A. Santiangeli, F. Zuccari, F. Ortenzi, A. Genovese, G. Spazzafumo, L. Nardone: "Energy consumption of a last generation full hybrid vehicle compared with a conventional vehicle in real drive conditions". ENERGY PROCEDIA, Vol.148, Aug. 2018, p.289–296, doi: http://dx.doi.org/10.1016/j.egypro.2018.08.080
  • R. Moradi, R. Tascioni, E. Habib, L. Cioccolanti, M. Villarini, E. Bocci, "Thermodynamic simulation of a small-scale organic Rankine‎ cycle testing facility‎ using R245fa", Energy Procedia, 2018, Vol. 148, p. 66-73
  • A. Monforti Ferrario, E. Bocci, et al. "Techno-economic analysis of in-situ production by electrolysis, biomass gasification and delivery systems for Hydrogen Refuelling Stations: Rome case study", Energy Procedia, 2018, p. 82-89
  • Hamedani S. R., Villarini M., Colantoni A., Moretti M., Bocci E., "Life Cycle Performance of Hydrogen Production viaAgro-Industrial Residue Gasification—A Small ScalePower Plant Study", Energies 2018, 6(7), 3167-3181; doi:10.3390/en6073167
  • Savuto, E., Navarro, R.M., Mota, N., (...), Carlini, M., Fierro, J.L.G. "Steam reforming of tar model compounds over Ni/Mayenite catalysts: effect of Ce addition", Fuel 2018, Vol. 224, pp. 676-686
  • Cioccolanti, L., Tascioni, R., Bocci, E., Villarini, M. "Parametric analysis of a solar Organic Rankine Cycle trigeneration system for residential applications",           Energy Conversion and Management 2018, Vol. 163, p. 407-419
  • Pallozzi, V., Di Carlo, A., Bocci, E., Carlini, M., "Combined gas conditioning and cleaning for reduction of tars in biomass gasification", Biomass and Bioenergy 2018, Vol.109, p. 85-90

Informatica e Telecomunicazioni

2021

  • G. M. Bianco, R. Giuliano, F. Mazzenga, G. Marrocco, "Multi-Slope Path Loss and Position Estimation with Grid Search and Experimental Results", IEEE Transactions on Signal and Information Processing over Networks, Vol. 7, Aug. 2021, p. 551-561, doi: 10.1109/TSIPN.2021.3106693.
  • F. Fallucchi, R. Di stabile, E. Purificato, R. Giuliano, E. W. De Luca, "Enriching Videos with Automatic Place Recognition in Google Maps", Multimedia Tools and Applications, Jul. 2021, Special Issue: 1201 – Video on Demand over Over The Top Platform, https://doi.org/10.1007/s11042-021-11253-9
  • V. Loscrí, A. M. Vegni, E. Innocenti, R. Giuliano and F. Mazzenga, "A joint Computer Vision and Reconfigurable Intelligent Meta-Surface Approach for Interference Reduction in Beyond 5G Networks," IEEE 22nd Int. Conf. High Performance Switching and Routing (HPSR), 7–9 June 2021, Paris, France, p. 1-6.
  • G. M. Bianco, R. Giuliano, G. Marrocco, F. Mazzenga, A. Mejia-Aguilar, "LoRa System for Search and Rescue: Path Loss Models and Procedures in Mountain Scenarios", IEEE Internet of Things Journal, Vol. 8, Is. 3, Feb. 2020, p. 1985 – 1999.

2020

  • M. Berbineau, J. Moreno, S. Kharbech, Y. Yan, A. Vizzari, R. Torrego, J. Soler, L. Clavier, R. Kassi, F. Mazzenga, R. Giuliano, V. Iñaki, C. Gransart, V. Deniau, Y. Cocheril, K. Svensson, "Emulation of various radio access technologies for zero on site testing in the railway domain – The Emulradio4rail platforms", Proceedings of 8th Transport Research Arena TRA 2020, Helsinki, Finland, 27 – 30 April 2020, p. 10
  • F. Mazzenga, R. Giuliano, F. Vatalaro "Effective Strategies for Gradual Copper-to-Fiber Transition in Access Networks", Computer Networks, Vol. 174, 19 Jun. 2020, p.10.
  • R. Giuliano, G. C. Cardarilli, C. Cesarini, L. Di Nunzio, F. Fallucchi, R. Fazzolari, F. Mazzenga, M. Re, A. Vizzarri, "Indoor Localization System Based on Bluetooth Low Energy for Museum Applications", MDPI Electronics, Jun. 2020, Vol. 9, Is. 6, 1055, p.20. Special Issue: Artificial Neural Network Applications in Power Electronics, Communication Networks and IoT.
  • E. Lorenzetti, L. Morettini, F. Mazzenga, A. Vizzarri, R. Giuliano, P. Peruzzi, C. Di Giovanni, "Blockchain e Internet of Things per la logistica Un caso di collaborazione tra ricerca e impresa", CNR-IRCrES Working Paper 4/2020, 14 Jul. 2020. ISSN 2421-7158.
  • R. Giuliano, F. Mazzenga, A. Vizzarri, "Integration of Broadcaster and Telco Access Networks for Real Time/Live Events", IEEE Transactions on Broadcasting, Vol. 66, Is. 3, Sept. 2020, p.667 – 675.
  • F. Fallucchi, M. Coladangelo, R. Giuliano, E. W. De Luca, "Predicting Employee Attrition Using Machine Learning Techniques", MDPI Computers, Nov. 2020, Vol. 9, Is. 4, 86, p. 17. Special Issue: Feature Paper in Computers.
  • Onorati, D., Tommasino, P., Ranaldi, L., Fallucchi, F., Zanzotto, "F.M. Pat-in-the-loop: Declarative knowledge for controlling neural networks", Future Internet 2020, 12(12), 218; https://doi.org/10.3390/fi12120218
  • Fallucchi F, De Luca EW (2020). "CMDIfication process for textbook resources", International journal of metadata, semantics and ontologies, vol. 14, p. 135-148, ISSN: 1744-2621, doi: 10.1504/IJMSO.2020.108331
  • Scheel C, Fallucchi F, De Luca EW (2020). "Visualization, Interaction and Analysis of Heterogeneous Textbook Resources". Future internet, vol. 12, ISSN: 1999-5903, doi: 10.3390/fi1210017
  • Petito M, Fallucchi F, De Luca EW (2020). "Semantic architectures and dashboard creation processes within the data and analytics framework", International journal of metadata, semantics and ontologies, vol. 14, p. 1-15, ISSN: 1744-2621, doi: 10.1504/IJMSO.2020.107790
  • Fallucchi F, Gerardi M, Petito M, De Luca EW (2020). "Blockchain Framework in Digital Government for the Certification of Authenticity, Timestamping and Data Property", Proceedings of the annual Hawaii Int. conference on system sciences, ISSN: 1530-1605
  • Zanzotto FM, Santilli A, Ranaldi L, Onorati D, Tommasino P, Fallucchi F (2020). "KERMIT: Complementing Transformer Architectures with Encoders of Explicit Syntactic Interpretations", In: Proceedings of the 2020 Conference on Empirical Methods in Natural Language Processing (EMNLP). 16th-20th Nov. 2020
  • R. Scano, F. Fallucchi, E. W. De Luca, (2020). "Machine Learning Models Applied to Weather Series Analysis", In Proc of the 14th Int. Conf. on Metadata and Semantics Research, MTSR 2020, Madrid, Spain 2-4 December, 2020, ISBN 978-3-030-71902-9.

2019

  • F. Mazzenga, R. Giuliano, F. Vatalaro, "Sharing of Copper Pairs for Improving DSL Performance in FTTx Access Networks", IEEE ACCESS, Vol. 7, Is. 1, Jan. 2019, p. 6637 – 6649.
  • E. W. De Luca, F. Fallucchi, R. Giuliano, G. Incarnato, F. Mazzenga, "Analysing and visualizing Tweets for U.S. President popularity", International Journal on Advanced Science, Engineering and Information Technology, Vol. 9, Is. 2, Apr. 2019, p. 692-699. ISSN: 2088-5334 DOI: 10.18517/ijaseit.9.2.8284 [Online].
    Available: http://www.insightsociety.org/ojaseit/index.php/ijaseit/article/download/8284/1940
  • G. Ciccarella, R. Giuliano, F. Mazzenga, F. Vatalaro, A. Vizzarri, "Edge cloud computing in telecommunications: Case studies on performance improvement and TCO saving", IEEE Int. Conf. Fog Mob. Edge Comp. (FMEC 2019), Rome, Italy, Jun. 2019, p.113-120.
  • R. Giuliano, F. Mazzenga, A. Vizzarri, "Satellite-based capillary 5G-mMTC networks for environmental applications", IEEE Aerospace and Electronic Systems Magazine, Vol. 34, Is. 10, Oct. 2019, p. 40 – 48.
  • F. Mazzenga, R. Giuliano, "Analysis of Zero-Forcing Vectoring for VDSL2 and Long Reach VDSL Technologies", IEEE Transactions on Communications, Vol. 67, Is. 11, Nov. 2019, p. 7811 – 7823.
  • Garoufallou, E, Fallucchi F, De Luca EW (2019). Metadata and Semantic Research: 13th International Conference, MTSR 2019, Rome, Italy, October 28–31, 2019, Revised Selected Papers. COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 1057, Cham, Switzerland: Springer nature, ISBN: 978-3-030-36598-1, ISSN: 1865-0929, doi: 10.1007/978-3-030-36599-8
  • De Luca E.W., Fallucchi F., Ligi A., Tarquini M (2019). "A Research Toolbox: A Complete Suite for Analysis in Digital Humanities". COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 1057 CCIS, p. 385-397, ISSN: 1865-0929, doi: 10.1007/978-3-030-36599-8_35
  • Fallucchi F, De Luca EW (2019). "Connecting and Mapping LOD and CMDI Through Knowledge Organization", COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 846, p. 291-301, ISSN: 1865-0929, doi: 10.1007/978-3-030-14401-2_27
  • Michele P., Fallucchi F., De Luca E.W. (2019). "Create Dashboards and Data Story with the Data & Analytics Frameworks", COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 1057 CCIS, p. 272-283, ISSN: 1865- 0929, doi: 10.1007/978-3-030-36599-8_24
  • Fallucchi F., Petito M., De Luca E.W. (2019). "Analysing and Visualising Open Data Within the Data and Analytics Framework", COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 846, p. 135-146, ISSN: 1865-0929, doi: 10.1007/978-3-030-14401-2_13
  • Fallucchi F, Steffen H, De Luca EW (2019). "Creating CMDI-Profiles for Textbook Resources", COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE, vol. 846, p. 302-314, ISSN: 1865-0929, doi: 10.1007/978-3-030-14401-2_28
  • Scheel, C., De Luca, E. W., "Fusing International Textbook Collections for Textbook Research", Digital Cultural Heritage. Hrsg. / Horst Kremers. Cham: Springer Verlag, 2019. S. 99-107
  • De Luca, E. W., Spielhaus, R., "Digital Transformation of Research Processes in the Humanities", Metadata and Semantic Research - 13th International Conference, MTSR 2019, Rome, Italy, October 28-31, 2019, Revised Selected Papers. Hrsg. / Emmanouel Garoufallou ; Francesca Fallucchi ; Ernesto William De Luca. Springer, 2019. S. 343-353 (Communications in Computer and Information Science; 1057).

2018

  • F. Mazzenga, R. Giuliano, "A Worst Case Performance Analysis of Approximated Zero Forcing Vectoring for DSL Systems", MDPI Information 2018, 9, 108, p.1-17.
  • Pieroni, A., Scarpato, N., Di Nunzio, L., Fallucchi, F., Raso, M., "Smarter City: Smart energy grid based on Blockchain technology", International Journal on Advanced Science, Engineering and Information Technology, 8 (1), 2018, p. 298—306, doi: 10.18517/ijaseit.8.1.4954.
  • Castellanos, A., De Luca, E.W., García-Serrano, A., Cigaran, J., "Partially squeezing the resources of the web of data towards applications" 2017 Intelligent Systems Conference, IntelliSys 2017, 2018, 2018-January, pp. 358–365

Matematica e Fisica

2020

  • S. Pazzaglia, G. Briganti, M. Mancuso, A. Saran, "Neurocognitive Decline Following Radiotherapy: Mechanisms and Therapeutic Implications", Cancers (Basel) 2020 Jan; 12(1): 146. doi: 10.3390/cancers12010146
  • S. Viaggiu "A proposal for Heisenberg uncertainty principle and STUR for curved back- grounds: an application to white dwarf, neutron stars and black holes", Class. Quant. Grav. (2020) https://doi.org/10.1088/1361-6382/abc907
  • Fassari, S., Nieto, L.M. & Rinaldi, F. The two lowest eigenvalues of the harmonic oscillator in the presence of a Gaussian perturbation. Eur. Phys. J. Plus 135, 728 (2020). https://doi.org/10.1140/epjp/s13360-020-00761-6
  • S. Fassari, I. Popov, F. Rinaldi, "On the behaviour of the two-dimensional Hamiltonian -\Delta+\lambda [\delta (\vec{x}+{\vec{x}}_{0})+\delta (\vec{x}-{\vec{x}}_{0})]$ as the distance between the two centres vanishes", Physica Scripta, Vol. 95, No. 7, 12 May 2020. https://doi.org/10.1088/1402-4896/ab8f3f
  • C. Iazeolla, "On boundary conditions and spacetime/fibre duality in Vasiliev's higher-spin gravity", in Proceedings of Science, CORFU2019 (2020) 181, p.53

2019

  • S. Fassari, F. Rinaldi, S. Viaggiu, "The 3D Perturbed Schrödinger Hamiltonian in a Friedmann Flat Spacetime Testing the Primordial Universe in a Non Commutative Spacetime", Math. Phys. Anal. Geom. (2019) 22: 4 .2, https://doi.org/10.1007/s11040-019-9302-z
  • S. Viaggiu "The physical origin of the cosmological constant: continuum limit and the analogy with the Casimir effect", Physica Scripta (2019) Volume 94, Number 12, 125014.
  • S. Viaggiu "The cosmological constant from Planckian fluctuations and the averaging procedure", Found. of Physics (2019) Volume 49, 119, 1287.
  • S. Albeverio, S. Fassari, M. Gadella, L. M. Nieto, F. Rinaldi, "The Birman-Schwinger Operator for a Parabolic Quantum Well in a Zero-Thickness Layer in the Presence of a Two-Dimensional Attractive Gaussian Impurity", Frontiers in Physics, Vol. 7, 2019, p. 102, doi 10.3389/fphy.2019.00102 https://www.frontiersin.org/article/10.3389/fphy.2019.00102
  • S. Fassari, M. Gadella, M. L. Glasser, L. M. Nieto, F. Rinaldi "Spectral properties of the two-dimensional Schrödinger Hamiltonian with various solvable confinements in the presence of a central point perturbation", Physica Scripta, Vol. 94, No. 5, 6 March 2019
  • S. Fassari, F. Rinaldi "Exact calculation of the trace of the Birman–Schwinger operator of the one-dimensional harmonic oscillator perturbed by an attractive Gaussian potential" – NANOSYSTEMS: PHYSICS, CHEMISTRY, MATHEMATICS 2019, 10 (6), P. 608–615, https://doi.org/10.17586/2220-8054-2019-10-6-608-615
  • R. Aros, C. Iazeolla, P. Sundell, Y. Yin, "Higher-spin fluctuations on spinless 4D BTZ black hole", in JHEP 1908 (2019) 171, p. 83
  • D. De Filippi, C. Iazeolla, P. Sundell, "Fronsdal fields from gauge functions in Vasiliev's higher-spin gravity", in JHEP 1910 (2019) 215, p.93

2018

  • S. Viaggiu, "Building a linear equation of state for trapped gravitons from finite size effects and the Schwarzschild black hole case", Int. J. Mod. Phys. D 27 (2018) 1850061.
  • S. Viaggiu, "Statistical description of massless excitations within a sphere with a linear equation of state and the dark energy case", Int. J. Mod. Phys. A 33 (2018) 1850074.
  • S. Fassari, F. Rinaldi, S. Viaggiu "The spectrum of the Schrödinger-Hamiltonian for trapped particles in a cylinder with a topological defect perturbed by attractive delta interactions", International Journal of Geometric Methods in Modern Physics 15(8) (2018) 1850135. https://doi.org/10.1142/S0219887818501359
  • S. Viaggiu, "On a physical description and origin of the cosmological constant", Class. Quantum Grav. 35 (2018) 215011.
  • S. Viaggiu, "An algorithm to generate anisotropic rotating fluids with vanishing viscosity", Eur. Phys. J. Plus (2018) 133: 551.
  • S. Viaggiu, "A quantum Friedmann flat spacetime: Uncertainty Relations, Thermodynamics and some cosmological consequences", Contributed paper to the Fourteenth Marcel Grossmann Meeting on General Relativity, University of Rome "La Sapienza", Italy, 12 – 18 July 2015; edited by Massimo Bianchi, Robert T Jantzen, Remo Ruffini. (World Scientific, Singapore, 2018) p.3739 – 3743.
  • S. Fassari, M. Gadella, M. L. Glasser, L. M. Nieto, F. Rinaldi "Level crossings of eigenvalues of the Schroedinger Hamiltonian of the isotropic harmonic oscillator perturbed by a central point interaction in different dimensions", NANOSYSTEMS: PHYSICS, CHEMISTRY, MATHEMATICS, 2018, 9 (2), P. 179–186, https://doi.org/10.17586/2220-8054-2018-9-2-179-186
  • C. Iazeolla, E. Sezgin, P. Sundell, "On exact solutions and perturbative schemes in higher-spin theory", in Universe 4 (2018) n.1, Special Issue on higher-spin gravity, p.45
  • R. Aros, C. Iazeolla, J. Norena, E. Sezgin, P. Sundell, Y. Yin, "FRW and domain walls in higher-spin gravity", in JHEP 1803 (2018) 153, Dec. 2017, p.55

Meccanica e Processi Tecnologici

2021

  • Giorgetti S, Giorgetti A, Jahromi R T, Arcidiacono G, 2021, "Machinery foundations dynamical analysis: a case study on reciprocating compressor foundation", Machines 2021, 9, 228
  • Arcidiacono G, Citti P, Giorgetti A, La Battaglia V, Marini S, 2021, "Sviluppo di approcci teorico sperimentali per il dimensionamento di trasmissioni CVT a cinghie trapezoidali", 50° Convegno Nazionale AIAS
  • Ceccanti F, Giorgetti A, Arcidiacono G, Citti P, 2021, "Laser Powder Bed Fusion: A Review on the Design Constraints", IOP Conf. Ser.: Materials Science and Engineering 1038 12065, doi:10.1088
  • Citti P, Molinari P, Giorgetti A, Polidoro A, Pompei L, Arcidiacono G, 2021, "Design and validation of low-cost handling equipment for the use of Barkhausen Noise Testing in worm gears grinding burn detection", IOP Conf. Ser.: Materials Science and Engineering 1038 012066, doi:10.1088
  • Dodun O, Slătineanu L, Arcidiacono G, Coteaţă M, Nagîţ G, Hriţuc A, 2021, "Selecting an alternative to solve a problem from several available alternatives", IOP Conf. Ser.: Materials Science and Engineering 1009 012018
  • Nikiforova N.D., Berni R., Arcidiacono G., Cantone L., Placidoli P., "Latin hypercube designs based on strong orthogonal arrays and Kriging modelling to improve the payload distribution of trains", Journal of Applied Statistics, Vol. 48, Is. 3, p. 498-516.

2020

  • Leccadito L., Parretti C. "Il lavoro che cambia: gli effetti della digitalizzazione sulla salute e la sicurezza nei luoghi di lavoro". Bollettino ingegneri 7-8 2020
  • S. Piantini, A. Giorgetti, N. Baldanzini, C. Monti, M. Pierini, (2020), "Design of a motorcycle steering damper for a safer ride", Machines, vol. 8, no. 2, pp 1-16.
  • F. Ceccanti, A. Giorgetti, C. Cavallini, G. Arcidiacono, P. Citti, (2020) "Comparative evaluation of fuzzy axiomatic design and IAMS comprehensive VIKOR approaches for material selection in mechanical design", International Journal of Engineering Research and Technology, vol. 13, no. 1, pp. 80-87.
  • Girgenti A., Giorgetti A., Rolli F., Arcidiacono G., Sgrevi A., Citti, P. (2020), "The importance of metrics for the evaluation of design performance for an axiomatic design system development", International Journal of Scientific and Technology Research, vol. 9, no. 3, pp. 4793-4798.

2019

  • Scarpino P.A., Parretti C., Scarpino F. "Valutare il rischio da archi elettrici e radiazioni in AC", AEIT numero 9/10 (2019).
  • Rolli F., Pecoraro, Luzi, Ricci, E. Pourabbas, C. Parretti, "Clinical risk evaluation of medical device software: an axiomatic design-based methodology", MATEC Web of Conferences 301, 00005 (2019). doi: 10.1051/matecconf/201930100005
  • Parretti C., Pourabbas E., Rolli F., Pecoraro F., Citti P., Giorgetti A., "Robust design of web services supporting the home administration of drug infusion in pediatric oncology", MATEC Web of Conferences 301, 00013 (2019), doi: 10.1051/matecconf/201930100013
  • Cappelli, A., Parretti, C., Cini, E., & Citti, P. (2019). Development of a new washing machine in olive oil extraction plant: A first application of usability-based approach. Journal of Agricultural Engineering, 50(3), 134-142. doi: 10.4081/jae.2019.949
  • F. Ceccanti, A. Giorgetti, P. Citti, (2019), "A Support Structure Design Strategy for Laser Powder Bed Fused Parts", Procedia Structural Integrity, 24, pp. 667-679.
  • A. Giorgetti, F. Ceccanti, P. Citti, A. Ciappi, G. Arcidiacono, (2019), "Axiomatic Design of Test Artifact for Laser Powder Bed Fusion Machine Capability Assessment", Proceedings of 13th International Conference on Axiomatic Design, Sydney (Australia), doi: 10.1051/matecconf/201930100006
  • M. Mariottini, N. Pieroni, P. Bertini, B. Pacifici, A. Giorgetti. (2019), "Wheel box test aeromechanical verification of new first stage bucket with integrated cover plates for MS5002 GT". In Proceedings of the ASME Turbo Expo, 9 doi:10.1115/GT2019-90075
  • A. Ciappi, A. Giorgetti, F. Ceccanti, G. Canegallo. (2019), "Technological and economical consideration for turbine blade tip restoration through metal deposition technologies". Proc. Inst. Mech. Eng. Part. C J Mech Eng Sci, doi:10.1177/0954406219888245
  • Cantone L, Arcidiacono G, 2019, "Numerical model for distributors of railway vehicles equipped with composite blocks", Procedia Structural Integrity 24, pp. 820-828

2018

  • Parretti, C., Rolli, F., Pourabbas, E., Citti, P. Axiomatic Selection of Health and Social Care Web Services on the Basis of Use Cases. (2018). In MATEC Web of Conferences (Vol. 223, p. 01013). EDP Sciences., doi: 10.1051/matecconf/201822301013
  • A. Giorgetti, G. Arcidiacono, A. Ciappi, R. Barbieri, P. Citti, (2018), "HNCR model following robust approach", Quality and Reliability Engineering International; DOI: 10.1002/qre.2324;
  • C. Monti, A. Giorgetti, L. Tognarelli, F. Mastromatteo, (2018) "Effects of Multiple Rejuvenation Cycles on Mechanical Properties and Microstructure of IN-738 Superalloy", Journal of Material Engineering and Performance, vol.27: 2524-2533. DOI: 10.1007/s11665-018-3335-5;
  • P. Citti, A. Giorgetti, U. Millefanti, (2018), "Mechanical characterization of a new low carbon bainitic steel for high performance crankshaft", Procedia Structural Integrity Vol.8, pp. 486-500, doi:10.1016/j.prostr.2017.12.048
  • G. Arcidiacono, B. Innocenti, A. Macrì, A. Giorgetti, (2018), "Design of a measurement system for the estimation of the knee kinematics", International Journal of Mechanical Engineering and Technology, 9 (2): p.866-875;
  • E. Giusti, A. Giorgetti, A. Girgenti, G. Arcidiacono, D. Checcacci, W. Schiavi, (2018), "New empirical design practice to evaluate the sealing capability of split flange for steam turbine", International Journal of Mechanical Engineering and Technology 9(2): p.839-850;
  • Cantone L, Arcidiacono G, Placidoli P, 2018, "Autonomous Determination of Pneumatic Parameters of Traindy", International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 9, pp. 1507–1515
  • Arcidiacono G, Placidoli P, 2018, "Material model calibration and validation for laminated composites using kriging surrogate models", International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 3, pp. 1107-1121
  • Cantone L, Arcidiacono G, 2018, "A study on releasing manoeuvre to improve freight safety and efficiency", International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 3, pp. 899-909
  • Arcidiacono G, Berni R, Cantone L, Nikiforova ND, Placidoli P, 2018, "Fast Method to Evaluate Payload Effect on In-Train Forces of Freight Trains", The Open Transportation Journal, 2018, 12, pp. 77-87, DOI: 10.2174/1874447801812010077 
  • Arcidiacono G, Placidoli P, Cantone L, 2018, "Automatic Identification of Tuning Parameters of Brake Pipe Pneumatic Model", International Journal of Mechanical Engineering and Technology, Vol. 9, Issue 2, pp. 829-838
  • Arcidiacono G, Cantone L, 2018, "A Model of Control Valve for Wagons Equipped by k-Blocks", International Journal on Advanced Science, Engineering and Information Technology, Vol. 8, Issue 1, pp. 285-290, DOI:10.18517/ijaseit.8.1.4974
  • Rolli F, Fradinho J, Giorgetti A, Citti P, Arcidiacono G, 2018, "Axiomatic decomposition of a zero-sum game: the penalty shoot-out case", Proceedings of 12th International Conference on Axiomatic Design, Reykjavik (Islanda). MATEC Web of Conferences Vol. 223, article id. 01005
  • Arcidiacono G, Berni R, Cantone L, Nikiforova ND, Placidoli P, 2018, "A Kriging modeling approach applied to the railways case", Procedia Structural Integrity 8, pp. 163-167
  • Arcidiacono G, Berni R, Bonora N, Catelani M, Pierini M, 2018, "Interuniversity Research Center StEering – Statistics for Engineering: Design, Quality and Reliability", Procedia Structural Integrity 8, pp. 168-173
  • Cannella F., Garinei A., Marsili R., Speranzini E. (2018), "Dynamic mechanical analysis and thermoelasticity for investigating composite structural elements made with additive manufacturing", Composite Structures, doi: https://doi.org/10.1016/j.compstruct.2017.11.029
  • Scappaticci L., Castellani F., Astolfi D., Garinei A. (2018), "Diagnosis of vortex induced vibration of a gravity damper", Diagnostyka, vol. Vol. 19, No. 2, doi: 10.29354/diag/86415

Processi gestionali

2021

  • M. La Regina, M. Tanzini, F. Orlandini, E. Cantinotti, R. Tartaglia, "Medical wards, the worst of the class for 'never events': considerations and actions", Int. and Emergency Medicine 2021 Feb. 8 https://DOI.org/10.1007/s111739-021-02657-4
  • Seghieri C., La Regina M., Tanzini M., Tartaglia R, "Looking for the right balance between human and economic costs during COVID-19 Outbreak", Int Journal Quality in Health Care, 2021, Feb. 20; 33(1)21 Doi:10.1093/intqhv/mzaa155
  • R. Tartaglia, M. La Regina, M. Tanzini, C. Pomare, R. Urwin, L. A. Ellis, V. Fineschi, F. Venneri, C. Seghieri, P. Lachman, J. Westbrook, J. Braithwaite, "COVID-19 Pandemic: International Survey of Management Strategies", Int. Journal Quality Health Care. 2021 Feb 20; 33(1):mzaa139. doi: 10.1093/intqhc/mzaa139.
  • Scopetti M, Santurro A, Tartaglia R, Frati P, Fineschi V., "Expanding frontiers of risk management: care safety in nursing home during COVID-19 pandemic", Int Journal Quality Health Care. 2021 Mar 5; Vol. 33, Is. 1, mzaa085. doi: 10.1093/intqhc/mzaa085
  • L. Donaldson, W Ricciardi, S Sheridan, R Tartaglia (Eds) Textbook of patient safety and clinical risk management. Springer 2021 Open access https://link.springer.com/book/10.1007%2F978-3-030-59403-9
  • G. Toccafondi, G. Dagliana, V. Fineschi, P. Frati, R. Tartaglia, "Proactive Risk Assessment through FMEA of Home Parenteral Nutrition Care Processes: A Survey Analysis", Current Pharmaceutical Biotechnology, Vol. 22, Is. 3, 2021, doi: 10.2174/1389201021666200612171943
  • M. La Regina, M. Tanzini, V. Fineschi, F. Venneri, G. Toccafondi, P. Lachman, R. Tartaglia, "Responding to COVID-19: the experience from Italy and recommendations for management and prevention", Int. Journal Quality in Health Care, Vol. 33, Is. 1, 2021, mzaa057, https://doi.org/10.1093/intqhc/mzaa057

2020

  • I. Witczak, I. Uchmanowicz, R. Tartaglia, L. Rypicz, "Safety Assessment of the Pharmacotherapy Process at the Nurse and Midwife Level – An Observational Study", Therapeutics and Clinical Risk Management 2020; 16:1057-1065.
  • R. Tartaglia, S. Prineas, D. Poli, S. Albolino, T. Bellandi, G. Biancofiore, G. Bertolini, G. Toccafondi, "Safety Analysis of 13 Suspicious Deaths in Intensive Care. Ergonomics and Forensic Approach Compared", Journal of Patient Safety: Mar. 11, 2020, doi: 10.1097/PTS.0000000000000666
  • C. Bellieni, M. Benvenuti, B. Bonvicini, T. Candelori, D. Capano, P. Costigliola, F. Franchi, G. Gualtieri, R. Gusinu, M. La Regina, I. Mercurio, M. Montisci, G. Nucci, C. Pergolizzi, E. Romano, S. Scolletta, M. Tanzini, R. Tartaglia, C. Terranova, F. Venneri, G. Viel. La responsabilità medica: cosa cambia dall'emergenza sanitaria. Maggioli editore, 2020

2019

  • Arcidiacono G., "L'integrazione Process & Human Excellence come valorizzare le risorse umane e gli ambienti di lavoro", Edizione Piaggio Group, 2019.
  • S. Albolino, T. Bellandi, S. Cappelletti, M. Di Paolo, V. Fineschi, P. Frati, C. Offidani, M. Tanzini, R. Tartaglia, E. Turillazzi, "New Rules on Patient's Safety and Professional Liability for the Italian Health Service", Current Pharm. Biotechnology, Vol. 20, Is. 8, 2019, doi: 10.2174/1389201020666190408094016
  • La Regina, M., Guarneri, F., Romano, E., R. Tartaglia et al. "What Quality and Safety of Care for Patients Admitted to Clinically Inappropriate Wards: a Systematic Review", J. Gen. Intern Med. 34, 1314–1321 (2019). https://doi.org/10.1007/s11606-019-05008-4

2018

  • Arcidiacono G, Pieroni A, "The Revolution Lean Six Sigma 4.0", International Journal on Advanced Science, Engineering and Information Technology, Vol. 8, Issue 1, 2018, pp. 141-149, DOI:10.18517/ijaseit.8.1.4593
  • Matt DT, Arcidiacono G, Rauch E, "Applying Lean to Healthcare Delivery Processes – a Case-based Research", International Journal on Advanced Science, Engineering and Information Technology, Vol. 8 Issue 1, 2018, p. 123-133,  DOI:10.18517/ijaseit.8.1.4965
  • G. Toccafondi, F. Balboni, M. Gallo, M. G. Colao, G. Mazzarelli, M. Tanzini, G. Dagliana, R. Tartaglia, G. Lippi, "Interruptions, work environment and work load perceptions in laboratory medicine: patient safety is a 'moving target'", De Gruyter, Sep 25 2018, Vol. 5, Is. 3, p.167-169, doi: https://doi.org/10.1515/dx-2018-0032
  • C. Scapellato, F. Balboni, M. Quercioli, P. Pezzati, G. Toccafondi, P. Casprini, A. Aita, R. Guerranti, M. Fiorini, G. Fuzzi, A. Tomei, R. Tartaglia, "Misidentification in laboratory medicine: results of the Tuscany survey of the Clinical Risk Management Study Group SIBioC and the Italian Society of Ergonomy (SIE)", Biochimica Clinica 2018; Vol. 42, Is. 2, p.141-145, doi: 10.19186/BC_2018.029
  • E. Piva, F. Balboni, R. Tartaglia et al. "Recommendations for the detection and management of critical results in clinical laboratories", Biochimica Clinica 2018; Vol. 42, Is. 2, p. 167-179, doi: 10.19186/BC_2018.015
  • T. Patone Cotrim, F. Serranheira, P. Sousa, S. Hignett, S. Albolino, R. (editors). Health and Social Care System of the Future: Demographic Changes, Digital Age and Human Factors. Proceedings of the Healthcare Ergonomics and Patient Safety HEPS 3- 5 July, 2019 Lisbon, Portugal.
  • S. Bagnara, R. Tartaglia, S. Albolino, A. Thomas, F. Yushi Fujita (Eds). Proc. 20th Congress of the Int. Ergonomics Association (IEA 2018). Vol. 1-10 Springer 2018.

Sostenibilità, Ambiente e Territorio

2021

  • R. Roila, R. Branciari, D. Ranucci, A. Stramenga, T. Tavoloni, T. Stecconi, R. Franceschini, A. Piersanti, (2021) "Risk Characterization and Benefit–Risk Assessment of Brominated Flame Retardant in Commercially Exploited Freshwater Fishes and Crayfish of Lake Trasimeno, Italy", International Journal of Environmental Research and Public Health, 18(16), 8763; ISSN: 1660-4601, doi: https://doi.org/10.3390/ijerph18168763
  • C. Bellone, "I Prati del Popolo Romano. La partecipazione come sperimentazione per il progetto dello spazio urbano" Franco Angeli 2021 ISBN: 978-88-351-1080-4
  • C. Bellone, F. Naselli, F. Andreassi, "New Governance Path through Digital Platforms and the Old Urban Planning Process in Italy", Sustainability 2021, 13, 6911. https://doi.org/10.3390/su13126911
  • C. Bellone, R. Ottavi, (2021) "The Lighting Plan: From a Sector-Specific Urbanistic Instrument to an Opportunity of Enhancement of the Urban Space for Improving Quality of Life", Intelligent Computing and Optimization. ICO 2020. Advances in Intelligent Systems and Computing, vol 1324. Springer, Cham. https://doi.org/10.1007/978-3-030-68154-898
  • C. Bellone, A. Fiduccia, F. Naselli, (2021) "The 'complex redevelopment' of a contemporary river-city", Downscaling, Rightsizing. Contrazione demografica e riorganizzazione V. 07 Il ritorno delle foreste e della natura, il territorio, Planum Publisher e Società Italiana degli Urbanisti, ISBN 978-88-99237-34-9 DOI 10.53143/PLM.C.721

2020

  • F. Andreassi, C. Bellone, "Pratiche di marketing di un nuovo colonialismo nella pianificazione: il ruolo della smart city". URBANISTICA INFORMAZIONI, vol. 292, 2020, 0392-5005 (rivista stampa) ISSN: 2239-4222 (rivista online)
  • C. Bellone, P. Trevisani, "Dal Processo partecipativo al Progetto Urbano. Il rione testaccio (Roma)". URBANISTICA INFORMAZIONI, vol. 292, 2020, 0392-5005 (rivista stampa) ISSN: 2239-4222 (rivista online)
  • R. Branciari, R. Franceschini, R. Roila, A. Valiani, I. Pecorelli, A. Piersanti, N. Haouet, M. Framboas, D. Ranucci, "Nutritional value and contaminant risk assessment of some commercially important fishes and crawfish of Lake Trasimeno, Italy", Int. journal of environmental research and public health 17 (7), 2545 2020/1
  • M. L. Marenzoni, M. B. Conti, E. Rossi, R. Rinoldo, R. Franceschini, E. Tesei, F. Porciello, S. Mancini, B. Favi, M. Gamboni, P. Boni, O. Raffaele, C. Desario, M. P. Franciosini, C. Buonavoglia, N. Decaro, "Detection of environmental contamination with feline and canine parvoviruses: new perspectives and challenges", Journal of Applied Microbiology 2020/12/16
  • Bellone C., Trevisani P., Colonna A. (2020). "Piazza Testaccio: esperienza di partecipazione nel recupero di uno spazio urbano nel centro storico di Roma", ARCHIVIO DI STUDI URBANI E REGIONALI, vol. 128, p. 64-79, ISSN: 1971-8519 and ISSN: 0004-0177
  • Bellone C., Andreassi F. (2020). "Evolution of a seismic medieval city. The case of L'Aquila", Sustainable Mediterranean Construction, vol. 4/2020, p. 11-13, ISSN: 2420-8213
  • Andreassi F, Bellone C (2020). "Tra smart city e smart landscape", URBANISTICA INFORMAZIONI, vol. 289, ISSN: 0392-5005 and ISSN: 2239-4222
  • Bellone C., Andreassi F. (2020). "Evolution of a Seismic Medieval City. The case of L'Aquila". In: Gerundo C, Stanganelli M. Landscape at risk. vol. 4/2020, ISBN: 978-88-6026-279-0
  • Bellone C. (2020). "L'Aquila: una città sospesa". In: Andreassi F. La ricostruzione di L'Aquila. 2020, p. 9-12, MILANO: FrancoAngeli, ISBN: 978-88-917-9086-6
  • Bellone C., Naselli F., Fiduccia A. (2020). "Riverfront regeneration and environmental recovery into the contemporary city". In: SIU, Downscaling, rightsizing contrazione demografica e riorganizzazione spaziale, XXIII Conferenza Nazionale SIU. Torino, 17-18 giugno 2021
  • Lay-Ekuakille, A., Blois, L., Velazquez, R., "Design of high efficiency polymer probe for geothermal energy transmission and measurement", Measurement: Journal of the International Measurement Confederation, 2020, 152.
  • Bonamente E, Termite LF, Garinei A, Biondi L, Rossi G (2020), "Run-time optimisation of sewer remote control systems using genetic algorithms and multi-criteria decision analysis: CSO and energy consumption reduction", Civil Engineering and Environmental Systems, ISSN: 1028-6608, doi: https://doi.org/10.1080/10286608.2020.1771701

2019

  • Biagiotti S., De Lorenzis I., Di Matteo U., Joime G. (2019). "Agricoltura sostenibile. Sviluppo locale e sfide globali", ROMA Aracne, ISBN: 8825526024
  • Saviano M., Barile S., Farioli F., Orecchini F., "Strengthening the science–policy–industry interface for progressing toward sustainability: a systems thinking view", Sustainability Science, 2019, 14(6), pp. 1549–1564
  • R. Branciari, R. Roila, A. Valiani, D. Ranucci, R. Ortenzi, D. Miraglia, L. Bailetti, R. Franceschini, "Nutritional quality, safety and sensory properties of smoked tench (Tinca tinca) pâté from Trasimeno Lake, Italy", Italian journal of food safety 8 (3) 2019/9/30
  • P. L. Carci, C. Bellone, A. Colonna, "The Structural Planning of The Municipality of Diamante", In: AA.VV. Next Places, Next Spaces Forthcoming approaches in architectural and urban designing, 2019, p. 285-297, Tirana, Albania: Epoka University, ISBN: 978-9928-135-33-9
  • Bellone C., Georgi J., Musacchio R.C. (2019). "New theoretical models and governance for territorial complexity". In: AAVV. ISUF NICOSIA 2019: XXVI International Seminar on Urban Form Cities as Assemblages. Nicosia: ISUF NIXOSIA, NICOSIA, 2-6 Jul 2019
  • Bellone C., Trevisani P., Colonna A. (2019). "Il processo partecipativo per l'ex campo di calcio della Roma nel rione Testaccio", Urbanistica Informazioni, vol. 283, p. 65-67, ISSN: 0392-5005 and ISSN: 2239-4222
  • Bellone C, Naselli F. (2019). "Inter-generational exchanges. The meaning of an integrated sustainable process for inland areas' development based on vernacular knowledge", FORMAMENTE, vol. 2, ISSN: 1970-7118 and 2284-4600
  • Andreassi F., Bellone C. (2019). "Strumenti digitali e governance emergenziale del territorio post sisma", Urbanistica Informazioni, vol. 287-288, p. 112-115, ISSN: 0392-5005 and ISSN: 0004-0177
  • Bellone C. (2019). "I trulli, identità di un territorio". In: Marzulli M. Trulli. meravigliose architetture nel contesto dei muri a secco. p. 7-10, Martina Franca (TA): Artebaria edizioni, ISBN: 9788896711767
  • Bellone C., Trevisani P., Colonna A. (2019). "The Partecipation Role of Citizens in 'Piazza Testaccio' Regeneration Project in Rome Historical City Center". In: Ruggiero C, Arslan H, Gianturco G. Contemporary Approaches in Social Science Researches. p. 283-286, Bialystok, Poland: E-BWN, ISBN: 978-83-953142-1-6
  • Bonamente E, Brunelli C, Castellani F, Garinei A, Biondi L, Marconi M, Piccioni E (2019), "A life-cycle approach for multi-objective optimisation in building design: methodology and application to a case study", Civil Engineering and Environmental Systems, ISSN: 1028-6608, doi: https://doi.org/10.1080/10286608.2019.1576646
  • Garinei A, Marini A, Piccioni E, Marconi M, Biondi L, Bertolini A, Ferrari G (2019), "Analysis of the effects of uncertainties on agrometeorological models", IOP Conference Series. Earth and Environmental Science, ISSN: 1755-1315
  • Termite L., Garinei A., Marini A., Marconi M., Biondi L. (2019), "Combining satellite data and Machine Learning techniques for irrigation Decision Support Systems", IOP Conference Series. Earth and Environmental Science, ISSN: 1755-1315, doi: 10.1109/MetroAgriFor.2019.8909279
  • Garinei A, Marini A, Piccioni E, Marconi M, Biondi L, Bertolini A, Ferrari G (2019), "Analysis of the effects of uncertainties on agrometeorological models", IOP Conference Series. Earth and Environmental Science, ISSN: 1755-1315, doi: 10.1088/1755-1315/275/1/012012

2018

  • Barile S., Orecchini F., Saviano M., Farioli F., "People, technology, and governance for sustainability: the contribution of systems and cyber-systemic thinking", Sustainability Science, 2018, 13(5), pp. 1197–1208
  • P. L. Carci, C. Bellone, S. Savoia, "A possible tool for the territory regeneration Organization and digitalization of the building process through BIM", FORMAMENTE vol. 3-4/2018, p. 35-50, ISSN: 2284-4600 and ISSN: 1970-7118, 2018
  • Bellone C., Ranucci P., Geropanta V. (2018). "The 'Governance' for Smart City Strategies and Territorial Planning". In: Pandian Vasant Ivan Zelinka Gerhard-WilhelmWeberIntelligent Computing & Optimization, Intelligent Computing & Optimization. ADVANCES IN INTELLIGENT SYSTEMS AND COMPUTING, vol. 866, p. 76-86, Springer, ISBN: 978-3-030-00978-6, ISSN: 2194-5357
  • Bellone C., Geropanta V. (2018). "The 'Smart' as a Project for the City Smart Technologies for Territorial Management Planning Strategies". In Pandian Vasant Ivan Zelinka Gerhard-WilhelmWeber Editors, Intelligent Computing & Optimization. ADVANCES IN INTELLIGENT SYSTEMS AND COMPUTING, vol. 866, p. 66-75, Springer, ISBN: 978-3-030-00978-6, ISSN: 2194-5357
  • Bellone C., Trevisani P., Colonna A. (2018). "Il recupero urbano attraverso esperienze di 'partecipazione': piazza Testaccio a Roma". URBANISTICA INFORMAZIONI, vol. 278-279, p. 82-85, ISSN: 0392-5005
  • Bellone C., Geropanta V., Kushi M. (2018). "Sustainable development and territorial regeneration in archaeological areas The case of Apollonia in Albania", FORMAMENTE, vol. 1-2/2018, p. 53-74, ISSN: 2284-4600 and ISSN: 1970-7118
  • Blois L., Giannoccaro N. I., Lay-Ekuakille A., Kalonga V., Kapita P. (2018). "NEMS Devices for Actuators to Control Nano-Urea Flow: Environmental and Biomedical Challenges", In IEEE Nanotechnology for Instrumentation and Measurement (NANO IM) 2018, p. 1-3, Mexico City, Mexico, 7-8 Nov. 2018, doi: 10.1109/NANOFIM.2018.8688620
  • Blois L., Lay-Ekuakille A., "Reliability and Metrology Features for Manufacturing Process of Nanoelements for Geo-Environmental Protection", In IEEE Nanotechnology for Instrumentation and Measurement (NANO IM) 2018, p. 1-4, Mexico City, Mexico, 7-8 Nov. 2018, doi: 10.1109/NANOFIM.2018.8688605
  • Blois L., Blois C. A., Caponi M., "Modelli e Metodi per lo Studio ed il Monitoraggio di Aree a Rischio Idrogeomorfologico", Convegno Nazionale di Idraulica e Costruzioni idrauliche, Ancona, Italy, 12-14 Sept 2018

Strutture civili e Geotecnica

2021

  • Milani, G., Grande, E., Bertolesi, E., Rotunno, T., Fagone, M. Debonding mechanism of FRP strengthened flat surfaces: Analytical approach and closed form solution. Construction and Building Materials, 2021, 302, 124144.
  • Bertolesi, E., Grande, E., Fagone, M., Milani, G., Rotunno, T. Mechanical model based on a BVP for FRPs applied on flat and curved masonry pillars with anchor spikes. Composite Structures, 2021, 273, 114251.
  • Grande, E., Imbimbo, M., Napoli, A., Nitiffi, R., Realfonzo, R. A Nonlinear Macro-Model for the Analysis of Monotonic and Cyclic Behaviour of Exterior RC Beam-Column Joints. Frontiers in Materials, 2021, 8, 719716.
  • Grande, E., Imbimbo, M., Napoli, A., Nitiffi, R., Realfonzo, R. A macro-modelling approach for RC beam-column exterior joints: first results on monotonic behaviour. Journal of Building Engineering, 2021, 39, 102202.
  • Grande, E., Milani, G. Numerical study of the bond behavior of DMF systems. Structures, 2021, 31, pp. 921–939.
  • Grande, E., Milani, G. Modeling of FRCM strengthening systems externally applied on curved masonry substrates. Engineering Structures, 2021, 233, 111895.
  • Grande, E., Milani, G. Procedure for the numerical characterization of the local bond behavior of FRCM. Composite Structures, 2021, 258, 113404.
  • Tomei, V., Grande, E., Imbimbo, M. Influence of geometric imperfections on the efficacy of optimization approaches for grid-shells. Engineering Structures, 2021, 228, 111502.
  • Caponero, M.A., Mongelli, M., Imbimbo, M., ...Polito, E., Grande, E. Structural monitoring of the ninfeo ponari by fibre optic sensors, photogrammetry and laser scanning. Archeologia e Calcolatori, 2021, pp. 223–232.
  • Saccucci, M., Cima, V., Grande, E., Imbimbo, M., Pelliccio, A. The Knowledge Process in the Seismic Assessment of Masonry Building Aggregates – An Italian Case Study. Springer Series in Geomechanics and Geoengineering, 2021, pp. 330–347.

2020

  • Bertolesi, E., Milani, G., Fagone, M., Rotunno, T., Grande, E., "Heterogeneous FE model for single lap shear tests on FRP reinforced masonry curved pillars with spike anchors", (2020) Construction and Building Materials, 258, art. no. 119629, DOI: 10.1016/j.conbuildmat.2020.119629
  • Milani, G., Grande, E., "Simple bisection procedure in quickly convergent explicit ODE solver to numerically analyze FRCM strengthening systems", (2020) Composites Part B: Engineering, 199, art. no. 108322, DOI: 10.1016/j.compositesb.2020.108322
  • Milani, G., Fagone, M., Rotunno, T., Grande, E., Bertolesi, E., "Development of an interface numerical model for C-FRPs applied on flat and curved masonry pillars", (2020) Composite Structures, 241, art. no. 112074, DOI: 10.1016/j.compstruct.2020.112074
  • Grande, E., Milani, G., "Numerical simulation of the tensile behavior of FRCM strengthening systems", (2020) Composites Part B: Engineering, 189, art. no. 107886, DOI: 10.1016/j.compositesb.2020.107886
  • Grande, E., Milani, G., Bertolesi, E., Fagone, M., Rotunno, T., "Modeling of the Tensile Behavior FRCM Systems for Repair and Strengthening Interventions of Masonry Structures", (2020) Frontiers in Built Environment, 6, art. no. 51, DOI: 10.3389/fbuil.2020.00051
  • Grande, E., Milani, G., Imbimbo, M., "Theoretical model for the study of the tensile behavior of FRCM reinforcements", (2020) Construction and Building Materials, 236, art. no. 117617, DOI: 10.1016/j.conbuildmat.2019.117617
  • Grande, E., Imbimbo, M., Tomei, V., "Optimization Strategies for Grid Shells: The Role of Joints", (2020) Journal of Architectural Engineering, 26 (1), art. no. 04019025, DOI: 10.1061/(ASCE)AE.1943-5568.0000375
  • Fagone, M., Rotunno, T., Bertolesi, E., Grande, E., Milani, G., "An experimental study on the effectiveness of CFRP reinforcements applied to curved masonry pillars", (2020) Lecture Notes in Mechanical Engineering, pp. 2134-2148. DOI: 10.1007/978-3-030-41057-5_170
  • Bertolesi, E., Milani, G., Grande, E., Fagone, M., Rotunno, T., "Numerical analysis of the bond behavior of frp applied to masonry curved substrates with anchor spikes", (2020) Lecture Notes in Mechanical Engineering, pp. 2149-2161. DOI: 10.1007/978-3-030-41057-5_171
  • Grande, E., Milani, G., Formisano, A., Ghiassi, B., Fabbrocino, F., "Bond behaviour of FRP strengthening applied on curved masonry substrates: Numerical study", (2020) International Journal of Masonry Research and Innovation, 5 (3), pp. 303-320. DOI: 10.1504/IJMRI.2020.107980
  • Gargano S., Lirer S., Liguori B. Flora A. (2020). "Effects of electro-osmosis on soft clayey soil with water of different salinity". Soils and Foundations, in press. https://doi.org/10.1016/j.sandf.2020.06.003.
  • Zullo R., Verdolotti L., Liguori B., Lirer S., Salzano de Luna M., Malara P., Filippone G. (2020). "Effect of rheology evolution of a sustainable chemical grout, sodium silicate based, for low pressure grouting in sensitive areas urbanized or historical sites". Construction and Building materials, Vol. 230 https://doi.org/10.1016/j.conbuildmat.2019.117055
  • Chiaradonna A., Lirer S., Flora A. (2020). "A damage-based liquefaction potential index for microzonation studies". Engineering Geology 272. https://doi.org/10.1016/j.enggeo.2020.105620.
  • Flora A., Bilotta E., Chiaradonna A., Lirer S., Mele L., Pingue L. (2020). "A field trial to test the efficiency of induced partial saturation and horizontal drains to mitigate the susceptibility of soils to liquefaction". Bulletin of Earthquake Engineering – Special Issue LIQUEFACT- in press. https://doi.org/10.1007/s10518-020-00914-z.
  • Mele L., Chiaradonna A., Lirer S., Flora A. (2020). "A robust empirical model to estimate earthquake-induced excess pore water pressure in saturated and unsaturated soils". Bulletin of Earthquake Engineering – Special Issue LIQUEFACT. DOI 10.1007/s10518-020-00970-5
  • Lirer S., Chiaradonna A., Mele L. (2020). "Soil Liquefaction: from mechanisms to effects on built environment". Rivista Italiana di Geotecnica RIG (3) 2020. dx.doi.org/10.19199/2020.2.0557-1405.025
  • Pietrosanti, D., De Angelis, M., Basili, M., "A generalized 2-DOF model for optimal design of MDOF structures controlled by Tuned Mass Damper Inerter (TMDI)", International Journal of Mechanical Sciences, 2020, 185, 105849
  • Basili, M., Casini, P., Morelli, L., Vestroni, F., "Vibration mitigation of rail noise barriers by hysteretic absorbers", Journal of Applied and Computational Mechanics, 2020, DOI: 10.22055/JACM.2020.32360.2044
  • Basili, M., De Angelis, M., "Preliminary experimental results of shaking table tests on mdof structure equipped with non-conventional tmd", Lecture Notes in Mechanical Engineering, 2020, pp. 223–232

2019

  • Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G., "Curved masonry pillars reinforced with anchored CFRP sheets: An experimental analysis", (2019) Composites Part B: Engineering, 174, art. no. 107008, DOI: 10.1016/j.compositesb.2019.107008
  • Grande, E., Fagone, M., Rotunno, T., Bertolesi, E., Milani, G., "Modelling of the bond behaviour of curved masonry specimens strengthened by CFRP with anchor spikes", (2019) Composites Part B: Engineering, 171, pp. 235-245. DOI: 10.1016/j.compositesb.2019.04.027
  • Valente, M., Milani, G., Grande, E., Formisano, A., "Historical masonry building aggregates: advanced numerical insight for an effective seismic assessment on two row housing compounds", (2019) Engineering Structures, 190, pp. 360-379. DOI: 10.1016/j.engstruct.2019.04.025
  • Capozucca, R., Grande, E., Milani, G., "Fiber reinforced polymer strengthened masonry: Delamination, experimental and numerical issues", (2019) Numerical Modeling of Masonry and Historical Structures: From Theory to Application, pp. 537-583. DOI: 10.1016/B978-0-08-102439-3.00015-4
  • Grande, E., Ghiassi, B., Imbimbo, M., "Theoretical and FE models for the study of the bond behavior of FRCM systems", (2019) Numerical Modeling of Masonry and Historical Structures: From Theory to Application, pp. 685-712. DOI: 10.1016/B978-0-08-102439-3.00019-1
  • Ghiassi, B., Oliveira, D.V., Grande, E., Lignola, G.P., "Pushover analysis of fiber-reinforced polymer-strengthened masonry", (2019) Numerical Modeling of Masonry and Historical Structures: From Theory to Application, pp. 629-657. DOI: 10.1016/B978-0-08-102439-3.00017-8
  • Fabbrocino, F., Formisano, A., Grande, E., Milani, G., "Bond mechanism of FRPs externally applied to curved masonry structures: Experimental outcomes and numerical modeling", (2019) Key Engineering Materials, 817 KEM, pp. 105-111. DOI: 10.4028/www.scientific.net/KEM.817.105
  • Grande, E., Imbimbo, M., Marfia, S., Sacco, E., "Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems", (2019) Frattura ed Integrita Strutturale, 13 (47), pp. 321-333. DOI: 10.3221/IGF-ESIS.47.24
  • Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G., "Some considerations about the effects of the bonding length on the effectiveness of spike anchors in CFRP reinforcements of masonry", (2019) Key Engineering Materials, 817 KEM, pp. 141-148. DOI: 10.4028/www.scientific.net/KEM.817.141
  • Caponero, M.A., Grande, E., Imbimbo, M., Modoni, G., Mongelli, M., Polito, E., "Structural health monitoring of the Ninfeo Ponari by combined use of fibre optic sensors, photogrammetry and laser scanning", (2019) 2019 IMEKO TC4 International Conference on Metrology for Archaeology and Cultural Heritage, MetroArchaeo 2019, pp. 229-233.
  • S. Gargano. S. Lirer, A. Flora (2019). "Analysis of the coupled electro-osmotic and mechanical consolidation in clayey soils", Ground Improvement Journal, ISSN: 1365-781X. https://doi.org/10.180/jgrim.18.00010.
  • Mele L., Tan Tian J., Lirer S., Flora A & Koseki J (2019). "Liquefaction resistance of unsaturated sands: experimental evidences and theoretical interpretation". Geotechnique 69(6): 541-553
  • Capasso I., Lirer S., Flora A., Ferone C., Cioffi R., Caputo D., Liguori B. (2019) "Reuse of mining waste as aggregates in fly ash based geopolymers", Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.02.164
  • Lirer S., Mele L. (2019). "On the apparent viscosity of granular soils during liquefaction tests", Bulletin of Earthquake Engineering. DOI 10.1007/s10518-019-00706-0
  • Gargano S., Lirer S., Flora A. (2019). "Mechanical and physical effects of electro-osmotic dewatering of clayey soils", Convegno Nazionale dei ricercatori di Ingegneria Geotecnica CNRIG2019, Lecco, 3-5 luglio 2019.
  • Mele L., Lirer S., Flora A. (2019. "The effect of densification on Pieve di Cento sands in cyclic simple shear tests", Convegno Nazionale dei ricercatori di Ingegneria Geotecnica, Politecnico di Milano, Polo territoriale di Lecco, 3-5 luglio 2019.
  • Ventini R., Flora A., Lirer S., Mancuso C. (2019). "On the effect of grading and degree of saturation on rockfill volumetric deformation", Convegno Nazionale dei ricercatori di Ingegneria Geotecnica, Politecnico di Milano, Polo territoriale di Lecco, 3-5 luglio 2019.
  • Lirer S., Bilotta E., Chiaradonna A., Fasano G., Flora A., Mele L., Nappa V. (2019). "Comparative analysis of soil liquefaction mitigation measures", XVII European Conference on Soil Mechanics and Geotechnical Engineering ECSMGE 2019 ", Reykjavik et. 2019.
  • Bilotta E., Chiaradonna A., Fasano G., Flora A., Mele L., Nappa V., Lirer S., Fioravante V. (2019). "Comparative analysis of SoA liquefaction mitigation measures". IABSE Symposium, March 27-29 2019, Guimares, Portugal.
  • Gargano S, Lirer S, Liguori B, Flora A (2019). "Experimental analysis of the effect of electrokinetic treatment of soils". 7th International Symposium on Deformation Characteristics of Geomaterials, IS-GLASGOW 2019, Glasgow 26th – 28th June 2019.
  • Ventini R., Flora A., Lirer S., Mancuso C. (2019). "Magnetic measurement system of sandy gravel specimens shape during tests in a large triaxial apparatus", 7th International Symposium on Deformation Characteristics of Geomaterials, IS-GLASGOW 2019, Glasgow 26th – 28th June 2019.
  • Mele L., Lirer S., Flora A. (2019). "The effect of confinement in liquefaction tests carried out in a cyclic simple shear apparatus". 7th International Symposium on Deformation Characteristics of Geomaterials, IS-GLASGOW 2019, Glasgow 26th – 28th June 2019.
  • Mele L., Lirer S., Flora A. (2019). "The specific deviatoric energy to liquefaction in saturated cyclic triaxial tests", Proc. of the 7th Int. Conference on Earthquake Geotechnical Engineering (ICEGE 2019), Roma, 17-20 June 2019.
  • Mele L., Lirer, S. & Flora, A. (2019). "A liquefaction surface to describe liquefaction phenomena in unsaturated sandy soils", Proc. of the 7th Int. Conference on Earthquake Geotechnical Engineering (ICEGE 2019), Roma, 17-20 June 2019.
  • Basili, M., Vestroni, F., Marcari, G., "Brick masonry panels strengthened with textile reinforced mortar: experimentation and numerical analysis", Construction and Building Materials, 2019, 227, 117061
  • Basili, M., Casini, P., Morelli, L., Vestroni, F., "A hysteretic absorber to mitigate vibrations of rail noise barriers", Journal of Physics: Conference Series, 2019, 1264(1), 012033
  • Basili, M., De Angelis, M., Pietrosanti, D., "Defective two adjacent single degree of freedom systems linked by spring-dashpot-inerter for vibration control", Engineering Structures, 2019, 188, pp. 480–492

2018

  • Bertolesi, E., Milani, G., Grande, E., Fagone, M., Rotunno, T., "Delamination of FRP reinforced curved masonry pillars: Experimentation and advanced numerical analyses", (2018) AIP Conference Proceedings, 2040, art. no. 090003. DOI: 10.1063/1.5079149
  • Bertolesi, E., Milani, G., Fagone, M., Rotunno, T., Grande, E., "Micro-mechanical FE numerical model for masonry curved pillars reinforced with FRP strips subjected to single lap shear tests", (2018) Composite Structures, 201, pp. 916-931. DOI: 10.1016/j.compstruct.2018.06.111
  • Grande, E., Fagone, M., Rotunno, T., Bertolesi, E., Milani, G., "Coupled interface-based modelling approach for the numerical analysis of curved masonry specimens strengthened by CFRP", (2018) Composite Structures, 200, pp. 498-506. DOI: 10.1016/j.compstruct.2018.05.118
  • Rotunno, T., Fagone, M., Bertolesi, E., Grande, E., Milani, G., "Single lap shear tests of masonry curved pillars externally strengthened by CFRP strips", (2018) Composite Structures, 200, pp. 434-448. DOI: 10.1016/j.compstruct.2018.05.097
  • Grande, E., Imbimbo, M., Sacco, E., "Numerical investigation on the bond behavior of FRCM strengthening systems", (2018) Composites Part B: Engineering, 145, pp. 240-251. DOI: 10.1016/j.compositesb.2018.03.010
  • Grande, E., Milani, G., "Interface modeling approach for the study of the bond behavior of FRCM strengthening systems", (2018) Composites Part B: Engineering, 141, pp. 221-233. DOI: 10.1016/j.compositesb.2017.12.052
  • Grande, E., Imbimbo, M., Tomei, V., "Structural Optimization of Grid Shells: Design Parameters and Combined Strategies", (2018) Journal of Architectural Engineering, 24 (1), art. no. 04017027, DOI: 10.1061/(ASCE)AE.1943-5568.0000286
  • Grande, E., Imbimbo, M., Tomei, V., "Role of global buckling in the optimization process of grid shells: Design strategies", (2018) Engineering Structures, 156, pp. 260-270. DOI: 10.1016/j.engstruct.2017.11.049
  • Grande, E., Ruotolo, G., "Design of SMA-brace devices for the seismic retrofit of steel CBF", (2018) Open Civil Engineering Journal, 12, DOI: 10.2174/1874149501812010001
  • Bertolesi, E., Grande, E., Milani, G., "Numerical modelling of the bond behaviour of FRCM systems externally applied to masonry substrates", (2018) Proceedings of the International Masonry Society Conferences, 0 (222279), pp. 2172-2181.
  • Grande, E., Imbimbo, M., Marfia, S., Sacco, E., "Numerical simulation of the de-bonding phenomenon of FRCM strengthening systems", (2018) Procedia Structural Integrity, 9, pp. 257-264. DOI: 10.1016/j.prostr.2018.06.037
  • Bertolesi, E., Milani, G., Ghiassi, B., Grande, E., "Full 3D FE micro-modelling for single lap shear tests on FRCM reinforcing systems", (2018) Proceedings of the International Masonry Society Conferences, 0 (222279), pp. 2250-2258.
  • Nitiffi, R., Imbimbo, M., Grande, E., Oliveira, D.V., "Numerical seismic assessment of masonry made of compressed earth blocks", (2018) IABSE Symposium, Nantes 2018: Tomorrow's Megastructures, pp. S23-157-S23-164.
  • Fagone, M., Rotunno, T., Grande, E., Bertolesi, E., Milani, G., "The influence of the joint thickness on the adhesion between CFRP reinforcements and masonry arches", (2018) Procedia Structural Integrity, 11, pp. 258-265. DOI: 10.1016/j.prostr.2018.11.034
  • Mele L., Flora A., Lirer S., d'Onofrio A., Bilotta E. (2018). "Experimental study of the injectability and effectiveness of laponite mixtures as liquefaction mitigation technique", 5th Geotechnical earthquake Engineering and Soil Dynamics Conference, GEESD V 2018, Austin (Texas).
  • Basili, M., De Angelis, M., Pietrosanti, D., "Modal analysis and dynamic response of a two adjacent single degree of freedom systems linked by spring-dashpot-inerter elements", Engineering Structures, 2018, 174, pp. 736–752